[Firehol-support] server setup

[kick]

Hi guys im setting up firehol on a debian server

the conf is like this:-
----------------------------------
version 5

# Accept all client traffic on any interface
interface any world
        client all accept
protection strong 10/sec 10
server "smtp pop3 imap dns rsync webmin http https ssh icmp irc"     accept

---------------------------------

the "ip link show"
shows the following interfaces:--
---------------------------------
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: shaper0: <> mtu 1500 qdisc noop qlen 10
    link/ether
3: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether aa:00:00:55:ab:54 brd ff:ff:ff:ff:ff:ff
4: teql0: <NOARP> mtu 1500 qdisc noop qlen 100
    link/void
5: tunl0: <NOARP> mtu 1480 qdisc noop
    link/ipip 0.0.0.0 brd 0.0.0.0
6: gre0: <NOARP> mtu 1476 qdisc noop
    link/gre 0.0.0.0 brd 0.0.0.0
-------------------------------



I "think" i may have it sorted But im not an expert :( and would like 
any input from you helpfull lot :)
If anything goes wrong the Least i need is ssh login so it can be 
adjusted (root login is allready disabled)

thanks in advance for any reply :)