[Firehol-support] Followup: FireHOL, OpenVPN bridge and routing

[Tsolakos Stavros]

Hi.

> 
> If you check the logs you will see that IN= and OUT= are set to br0.
> Packets are coming in from the bridge and are going out back to the
> bridge, but you don't have such a router defined in firehol.conf.

Thank you.

I figured it out a few days ago, finally. But isn't it confusing? I
mean, routing from the same interface to the same interface again? I had
the impression that routing happens between 2 interfaces at least.

Thanks again.

Stavros