[Firehol-support] text "ERROR" shown by "fireqos status" for first class in class group

Phineas Gage phineas919 at gmail.com
Sun Apr 19 11:05:20 CEST 2015


Hi,

In FireQOS 2.0.2, When I run "fireqos status <dev>” (where <dev> is either eth1-in or eth1-out), I see the text ERROR for the first class in a class group. So the output looks like this:

-----
FireQOS 2.0.2
(C) 2013-2014 Costa Tsaousis, GPL

eth1-out: eth1 output => eth1, type: , overhead: 
Rate: 100000Kbit/s, min: 12Kbit/s
Values in Kbit/s

  CLASS     lan    adsl ad/voip ad/busi ad/defa ad/conf ad/priv default 
CLASSID    1:11    12:1   12:11   12:12 12:5012   12:14   12:15  1:5000 
 COMMIT   50000     360      72      54      54      54      54      12 
    MAX   50000     360     360     360     360     360     360  100000 

PRIORIT       1       0       0       1       4       2       3       1 
  QDISC fq_code fq_code fq_code fq_code fq_code fq_code fq_code fq_code 

 color code (packets):  backlog  |  dropped  |  delayed  |  requeued 
 Class Utilization on eth1-out (eth1 output => eth1) - values in Kbit/s
  TOTAL     lan    adsl ad/voip ad/busi ad/defa ad/conf ad/priv default 
     19       2      15   ERROR       -       1       -      14       2 
     41       4      37   ERROR       -       -       -      37       - 
——

Looking at the fireqos script, it’s line 3022, in FireQOS 2.0.2, that decides to print ERROR when the value of $y is zero length, for some reason.

Here are a few things I’ve noticed about it:

- If the first class in my class group is “default”, it doesn’t happen. That’s the way I had it before, but I need to make a change now.
- If I change the rates on my classes and groups slightly, the ERROR can go away, but it seems inconsistent what changes produce what result.
- If I switch the order such that for example “business” is the first class in the group instead of “voip” then “business” is the one that sees the error.

I attached my fireqos.conf, with variable definitions removed, as well as the output from “tc class show dev eth1”, in case it’s useful.

Any ideas?

Regards,
Phineas


More information about the Firehol-support mailing list